Emulation
Remote Emulation Server SE

Available from Blackhawk are several different emulation adapters to fit Texas Instruments standard JTAG target headers. Below is a list of emulation adapters currently available.

Pin and Signal Definitions

For reference, the tables at the bottom describe each connection's signal to pin arrangement.

List of Pin Converters

The tables below can be used to identify the pin converter you need. First, find the row or rows that match the connector on your emulator using the Emulator Connection column. Second, find the connector that matches your target in the Target Connection column. Then select the link under the Pin Converter column.

Naming Abbreviations

The following describes the naming of an adapter or pin converter, which reads from left to right, or, for the actual adapter PCB, it is interpreted top to bottom.

##e_typeE-##t_typeT

• ## Is the number of pins (14, 20, 60, etc.)
• e emulator connection
• t target connection
• typeE Describes the emulator connection type (TI, cTI, ARM, etc.)
• typet Describes the target connection type (TI, cTI, ARM, etc.)

The hypen (-) separates the two types of connections (emulator and target). The absence of a notation as _typeE or _typeT in either emulaor or target connectins types, assumes that the emulator or target is a TI device or compatible (i.e."_TI").

Pin Converters

USI Part Number	BH Part No.	Description
USI13-PIN5	BH-14e_TI-20t_cTI	Converts the standard 2x 14-pin JTAG connector found on most XDS510 emulators to the 20-pin compact TI (cTI) target header		View Picture
USI13-PIN4	BH-14e_TI-60t_TI	Converts the standard 2x7 14-pin JTAG connector found on most XDS510 emulators to the 60-pin high-desnity XDS560 Trace header		View Picture
USI13-PIN1	BH-20e_TI-14t_TI	Converts and emulator's 20-pin Compact TI (cTI) header to the standard 2x7 14-pin target header		View Picture
USI13-PIN2	BH-20e_cTI-20t_ARM	Converts and emulator's 20-pin Compact TI (cTI) header to the 20-pin ARM JTAG header		View Picture
USI13-PIN3	BH-20e_cTI-60t_TI	Converts an emulator's 20-pin Compact TI (cTI) header to the 60-pin high-density XDS560 Trace header		View Picture
USI13-PIN6	BH-60e_TI-14t_TI	Converts the 60-pin high-density XDS560 Trace Module header to a standard 2x7 14-pin target header		View Picture
USI13-PIN7	BH-60e_TI-60t_TI	Pin saver to protect trace module's 60-pin high-density XDS560 Trace header		View Picture

Pin-out Descriptions

Additional Information

• JACK Quick Start Guide
• Blackhawk Adaptive Clocking Technical Article
• Compact TI (cTI) Quick Start Guide
• Blackhawk 14e_20t_cTI Quick Start Guide
• How to Buy