USI - Mfgs - Emulators - Blackhawk

Ultimate Solutions, Inc. | 10 Clever Drive | Tewksbury, MA 01876 USA

The new bus-powered Blackhawk USB560BP is the third generation of the widely used XDS560-class emulator first introduced by Blackhawk and the only bus-powered USB JTAG Emulator that supports all of the advanced capabilities of Texas Instruments latest DSPs. These capabilities include high-speed Real-Time Data Exchange (RTDX)™, lightning speed downloads and Advanced Event Triggering to quickly find and fix real-time software problems.

Now with Native ADAPTIVE CLOCKING support for TI ARM-based devices!
(i.e. TMS470, OMAP, and DaVinci platforms)

The emulator pod, which is under 5 ounces in weight, does not require an external power supply! Features include a variable TCK (timing clock) up to 50 MHz and highly flexible 6 inch cable assembly suitable for use from 5.0 volts down to 0.5 volts to support TI low-voltage device roadmap. Software compatibility with all versions of Code Composer Studio™ (CCStudio) integrated development environment (IDE) v2.2 and above, and a driver independent DLL developed by Blackhawk, assures existing and future device compatibility for new DSPs right out of the box with no upgrades required.

The Blackhawk USB560BP JTAG Emulator supports TMS320, TMS470 (ARM®) and OMAP™ families. The USB560BP JTAG Emulator is also compatible with Code Composer Studio Flash-burner utility. Please contact Blackhawk™ by phone or email for more technical information, performance, pricing and availability.

	Features
	USB Bus-powered, needs no power supply
	High-speed RTDX™ Support with data rates of over 2 MB/sec
	New compact pod with status indicator LED
	High-speed USB 2.0 (480 Mbits/sec) port
	Auto-sensing low I/O voltage support
	Real-time, non-intrusive Advanced Event Triggering capability
	Native ADAPTIVE CLOCKING support for TI ARM-based devices
	Windows Plug 'n Play Installation
	Up to 100 times faster than XDS510 emulators
	Full Code Composer Studio IDE compatibility for versions 2.2 and later

Part No.	Description
USI13-0560BP	USB560BP JTAG Emulator-Bus powered

Datasheets
USB560BP Datasheet		[download]
Adaptive Clocking Kit		[download]

	System Requirements
	PC running Windows® 2000, XP or Vista
	Code Composer Studio IDE v2.2 or later
	Free USB1.1 or 2.0 port (2.0 preferred)
	CD-ROM drive for driver installation
	Target hardware with standard JTAG header