Dave S.r.L.

Dave S.r.L's primary focus is the design and production of a wide line of CPU modules that enable customers to quickly get their projects started. Development time and engineering costs are dramatically reduced since customers can focus on adding peripherals needed and writing applications. Each module is provided with it's evaluation board and development kit, which allows customers to test all features concerning modules.

Available Products

• ARIA - Freescale MPC5121
• Chameleon - PPC405EP
• B2 - ARM7TDMI
• Parsy - Low Power ARM920T
• Zefeer - ARM920T (Compact Module)
• sQuirrel - ARM11 i.MX31C (For Mobile Applications)
• Lizard - ARM Cortex-A8

ARIA Freescale MPC5121

ARIA is a ready-to-use CPU module based on Freescale MPC512x Power Architecture CPU. The ARIA CPU module is suitable for single board computing for industrial, automotive and consumer applications, including embedded solutions requiring network connectivity, sophisticated displays, rich user-interfaces (telematics, rear-seat entertainment systems, vehicle connectivity, infotainment, surveillance and security systems). ARIA allows quick deployment of solutions due to the COM Express compliance and prvides high flexibility thanks to the powerful FPGA on board.

ARIA Technical Specifications

• CPU: Freescale MPC5121 or MPC51263 @ 400 MHZ
• NAND Flash: Up to 1 GB
• NOR Flash: Up to 128 MB
• DDR2 SDRAM: Up to 1 GB

Main Features

• e300 Core - Power Architecture Technology - Up to 760 MIPS
• PowerVR® MBX Lite 2D/3D Graphics Engine
• 32 bit AXE RISC Audio Accelerator Engine

Connectivity

• LAN: 10/100 Fast Ethernet
• USB: 4 x 2.0 Host ports
• UART: 4 x serial ports
• 2 x CAN ports
• 1 x LVDS port

I/O

• 1 x Parallel ATA
• 1 x Serial ATA
• SD/SDHC/MMC
• External PCI bus
• LPC bus
• Touch screen controller
• GPIO available
• FPGA on board

Other Features

• JTAG interfaces (CPU & FPGA)
• Temperature sensor
• Serial ID chip for unique identification
• 12C EEPROM

Software

• U-Boot
• Linux 2.6x

Additional Information

• ARIA Datasheet
• Please contact us for pricing - Phone 866.455.3383 or use our "Contact Us" form below
• Contact Us

PPC Chameleon

The PPChameleon Evaluation Board and Development Kit supports ready-to-use CPU modules based on the PowerPC 405EP. All native buses and interfaces of the microprocessor are on the board or routed to separate connectors. Therefore, users may perform full on-board tests. A complete software suite, PELK (PowerPC Embedded Linux Kit) is provided with PPChameleon Evaluation Board. This software not only allows a straightforward use of the GNU toolchain, but is also continuously up to date and maintained with new peripherals, applications and drivers.

PPChameleon Features

• CPU module based on PowerPC 405EP
• PCI host bus and Expansion Bus fully available
• NAND Flash on-board (option) & JFFS2 filing system
• Ready for Linux 2.4.20 and native component drivers
• Evaluation Board available with development kit
• Development Kit available in GNU environment
• ITE and ISM approvals
• Ready for IBM Technology

Evaluation Board Information

• ATX PSU
• SODIMM connector for PPChameleon Module
• NAND and CPLD bus adaption
• SRAM for bootcode debugging
• PCI clocking circuitry
• JTAG and TRACE interfaces
• Bootstrapping circuitry (FLASH or SRAM)
• 3 PCI slots
• Expansion Bus connector
• RTC with back-up battery
• 2nd PHY 10/100 and (2) RJ45 including magnets
• RS485 and full RS232

Additional Information

• PPChameleon Datasheet
• PPChameleon Evaluation Board & Development Kit
• Please contact us for pricing - Phone 866.455.3383 or use our "Contact Us" form below
• Contact Us

B2 ARM7TDMI

B2 is a vertically integrated "network engine" equipped with proper hardware and software resources. B2 has been designed in order to offer a cost effective answer to networking issues. B2 dramatically shortens the time, cost and troubleshooting pains that are usually needed to network an electronics device, just by plugging B2 in! Modules are supplied with either customized application or with embedded bootloader that allows users to develop and load their own applications. In fact both eCos and uCLinux have been ported to B2 hardware.

B2 Development Kit eCos (B2DK) Features

• Includes B2 Module & B2 Evaluation Board
• eCos real-time operating system (source code)
• Bootloader (source code)
• Documentation (application examples, tutorials, application notes, etc.)

B2 uClinux Kit (B2ULK)

• Includes B2 Module & B2 Evaluation Board
• uClinux operating system (source code)
• U-Boot bootloader (source code)
• Documentation (application examples, tutorials, application notes, etc.)

Technical Characteristics

• Processor: Samsung S3C44BOX
• RAM: 8 to 32 MByte
• Flash NOR: 2 to 8 MBytes

Additional Information

• B2 Datasheet
• Please contact us for pricing - Phone: 866.455.3383 or use our "Contact Us" form below
• Contact Us

Parsy Low Power ARM920T

Parsy is a CPU Module based on the well-known ARM920T series designed for portable applications. Main characteristics are very low intrinsic power consumption due to CPU (i.MX family), mobile memories, optimized drivers and peripherals, and compact size factor. Also included is 3.0V single power supply source with on-board regulations suited for battery supply.

Parsy Embedded Linux Kit (PELK)
Parsy windows CE Kit (PWCK) Features

• Includes Parsy Module (BA Model) & Parsy EVB evaluation board
• Linux/Windows CE operating system (source code)
• U-Boot bootloader (source code)
• Documentation (application examples, tutorials, application notes, etc.)

B2 uClinux Kit (B2ULK)

• Includes B2 Module & B2 Evaluation Board
• uClinux operating system (source code)
• U-Boot bootloader (source code)
• Documentation (application examples, tutorials, application notes, etc.)

Technical Characteristics

• Processor: Freescale Dragonball i.MX (ARM920T)
• RAM: 64-128 MByte (Mobile)
• Flash NOR: 4-64 MByte
• Mechanical: 40 (W) x 58 (L) x 6 (H) mm3

Additional Information

• Parsy Datasheet
• Please contact us for pricing - Phone: 866.455.3383 or use our "Contact Us" form below
• Contact Us

Zefeer CPU Compact Modules - ARM920T

Zefeer CPU compact modules are ARM920T based peripherals native with the family of modules act like a "host" (USB, Keyboard, LCD controller, IDE). Therefore, typical applications of this module are interactive terminals, kiosks, advanced instruments, info-points electronics, and in general everything that must look like a PC without being a PC and without the cost of a PC.

Zefeer Development Kits

The development boards described below are available with Zefeer CPU board families: Linux (ZELK), windows CE (ZWCK) and eCos (ZECK). They will be associated with two kinds of Evaluation Boards (EVBZ). The first (EVBZL) will have a DZB module (EP9302), the latter (EVBZH) mounts a DZQ module (EP9315). Of course this is due to the fact that the highest microprocessor family (>9303) is provided with an abundance of interfaces, while the lowest (9301 & 9302) are simpler.

Zefeer Embedded Linux Kit L (ZELKL)

• Includes Zefeer module (DZB model) & Zefeer EVB-L Evaluation Board
• Linux operating system (source code)
• U-Boot bootloader (source code)
• Documentation (application examples, tutorials, application notes, etc.)

Zefeer Embedded Linux Kit H (ZELKH)

• Includes Zefeer module (DZQ model) & Zefeer EVB-H Evaluation Board including 240 x 320 TFT LCD Panel
• Linux operating system (source code)
• U-Boot bootloader (source code)
• Documentation (application examples, tutorials, application notes, etc.)

Zefeer WindowsCE 5.0 Kit (ZWCK)

• Includes Zefeer module (DZQ model) & Zefeer EVB-H Evaluation Board including 240 x 320 TFT LCD Panel
• Board Support Package )BSP) including sources
• Software Development Kit (SDK)
• U-Boot bootloader (source code)
• Documentation

Technical Characteristics

• Processor: Cirrus Logic EP93xx
• RAM: 32-128 MByte
• Flash NOR: 4-64 MByte
• Mechanical: 40 (W) x 58 (L) x 6 (H) mm3

Additional Information

• Zefeer CPU Compact Modules Datasheet
• Zefeer Development Kits Datasheet
• Please contact us for pricing - Phone: 866.455.3383 or use our "Contact Us" form below
• Contact Us

sQuirrel CPU Module

sQuirrel is DAVE's CPU module dedicated to mobile applications and powered by Freescale's ARM1136 i.MX31C CPU. Its compact form factor, reliability and low power consumption make it suitable for palm based solutions both in Linux and Windows CE environments. The ARM11 architecture, which is the base of some of the most famous smartphones, is perfect for designing mobile platforms with a winning balance bewteen performance and power consumption. sQuirrel can be easily integrated in the system design and offers full compliance with industrial specifications.

Technical Characteristics

• CPU: Freescale i.MX31C @ 400 MHz
• Flash NAND: Up to 2 GB
• DDR: Low Power 32 MB to 256 MB
• Size: 73mm x 51mm

Main Features

• Battery Charger
• USB: 1 x Host + 1 x OTG
• UARTS: 1 x full, 1 x 4-wire serial ports
• Serial buses: 2 x I2C, 1 x SPI
• LCD Controller + Touch screen
• 2 x SD/MMC
• One Wire
• SIM, Camera Interface, Analog Audio In and Out
• 5 x ADC
• Linux and WinCE development kits

Note: Other memory configurations available. Please call for pricing

Additional Information

• sQuirrel CPU Module Datasheet
• Please contact us for pricing - Phone: 866.455.3383 or use our "Contact Us" form below
• Contact Us

Lizard CPU Module

Lizard is the new CPU module by DAVE based on the new Texas Instruments "Sitara" AM3505/AM3517 application processor. Its a groundbreaking solution, based on the Cortex-A8 architecture, the last evolution in the ARM family, specifically designed to satisfy the increasing demand of systems with high performance but low power consumption.

Technical Characteristics

• Architecture: ARM Cortex-A8
• CPU: TI "Sitara" AM3505/AM3517 @ 500 MHz
• Flash NAND: Up to 2 GB
• RAM: DDR2, up to 256MB
• Size 70mm x 50mm

Main Features

• 2x USB Host, 1 x USB OTG
• 2x SD/MMC
• 1x High-end CAN controller
• 1x Fast Ethernet LAN
• 3x UART
• 2x 12C
• 1x SPI
• 1x I2S

Display/Video/Graphic subsystems

• Up to 24 bit, 74.25 MHz pixel clock
• TFT and TV out
• Video processing front-end (VPFE), 16 bit video input port
• Touch screen controller

Other

• 3.3V GPIO available
• EEPROM
• RTC
• 8x8 Keypad Controller
• Zefeer compatibility

Development Kits

Linux and WindowsCE development kits will eb available for customers who want to start the development on the Lizard platform Customers can choose among two different evaluation boards, LizardEVB-Lite and LizzrdEVB-High (coming soon).

LizardEVB-Lite

The LizardEVB-Lite (LELK) is an evaluation board directly derived from the ZefeerEVB and is dedicated to customers who need a simple solution for a quick evaluation. The available peripherals are a subset of the Lizard interfaces:

• Ethernet 10/100MBit LAN w/PHY on RJ45
• 3x USB Host
• 3x Serial Port (RS232)
• JTAG connector
• ADC
• 12S Audio
• LCD TFT
• Touch screen
• Keypad
• GPIO
• ATX Power Connector)

Additional Information

• Lizard CPU Module Datasheet
• Please contact us for pricing - Phone: 866.455.3383 or use our "Contact Us" form below
• Contact Us