; bdiGDB configuration for ARM IMX31
; --------------------------------------------------
;
[INIT]
WCP15   0x4001      0x00f00000  ;CPACC: allow CP10 and CP11 access
WCP10   0x00e8      0x40000000  ;FPEXC: enable VFP11 coprocessor
;

[TARGET]
CPUTYPE     ARM1136
;CLOCK       0 SLOW              ;JTAG clock (0=Adaptive,1=16MHz,2=8MHz,3=4MHz)
CLOCK       3                   ;JTAG clock (0=Adaptive,1=16MHz,2=8MHz,3=4MHz)
POWERUP     10000                ;start delay after power-up detected in ms
WAKEUP      4000                ;delay time (ms) after reset deassert
;RESET      1000                 ;set reset hold time to 1s
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
VECTOR      CATCH 0x1f          ;catch D_Abort, P_Abort, SWI, Undef and Reset
;VECTOR      CATCH 0x00          ;do not catch any vector
BREAKMODE   HARD                ;SOFT or HARD
DCC         7                   ;DCC I/O via TCP port 7
;
SCANPRED    2 9                 ;no JTAG devices before the ARM1136
SCANSUCC    1 4                 ;the ETMBUF after the ARM1136 core


[HOST]
;IP          151.120.25.119
;FILE        E:\cygwin\home\demo\arm11\fibo.x
;FORMAT      ELF
;LOAD        MANUAL      ;load file MANUAL or AUTO after reset
PROMPT      ARM1136>

[FLASH]
WORKSPACE   0x1FFFC000          ;Workspace in target RAM for fast programming algorithm
CHIPTYPE    I28BX16           	;Flash type
CHIPSIZE    0x200000          	;The size of one flash chip in bytes
BUSWIDTH    16                  ;The width of the flash memory bus in bits (8 | 16 | 32)
;FILE        $arm1136.cfg
;FORMAT      BIN 0x00010000

[REGS]
;FILE	$reg1136.def