; This configuration uses the monitor to setup the board
;
[INIT]
; empty


[TARGET]
; common parameters
POWERUP     2000       ;power-up delay 2 seconds
JTAGCLOCK   0          ;use 32 MHz JTAG clock
;JTAGCLOCK   1          ;use 16 MHz JTAG clock
;JTAGCLOCK   2          ;use 11 MHz JTAG clock


; Core#0 parameters (active core after reset)
#0 CPUTYPE     CNMIPS           ;the used target CPU type
#0 ENDIAN      BIG              ;target is big endian
#0 JTAGDELAY   5                ;40 TCK's access delay
;#0 STARTUP     STOP 5000        ;STOP mode is used to let the monitor init the system
#0 STARTUP     HALT             ;halt at the boot vector
#0 WORKSPACE   0xA0000080       ;workspace in target RAM for fast download
#0 BREAKMODE   HARD             ;SOFT or HARD
#0 SCANPRED    11  55           ;select last core in scan chain
#0 SCANSUCC    0   0
;
; Core#1 parameters
#1 CPUTYPE     CNMIPS
#1 ENDIAN      BIG
#1 JTAGDELAY   5
#1 STARTUP     WAIT             ;CPU is held in reset
#1 BREAKMODE   HARD
#1 SCANPRED    10  50
#1 SCANSUCC    1   5
;
; Core#2 parameters
#2 CPUTYPE     CNMIPS
#2 ENDIAN      BIG
#2 JTAGDELAY   5
#2 STARTUP     WAIT             ;CPU is held in reset
#2 BREAKMODE   HARD
#2 SCANPRED    9   45
#2 SCANSUCC    2   10
;
; Core#3 parameters
#3 CPUTYPE     CNMIPS
#3 ENDIAN      BIG
#3 JTAGDELAY   5
#3 STARTUP     WAIT             ;CPU is held in reset
#3 BREAKMODE   HARD
#3 SCANPRED    8   40
#3 SCANSUCC    3   15
;
; Core#4 parameters
#4 CPUTYPE     CNMIPS
#4 ENDIAN      BIG
#4 JTAGDELAY   5
#4 STARTUP     WAIT             ;CPU is held in reset
#4 BREAKMODE   HARD
#4 SCANPRED    7   35
#4 SCANSUCC    4   20
;
; Core#5 parameters
#5 CPUTYPE     CNMIPS
#5 ENDIAN      BIG
#5 JTAGDELAY   5
#5 STARTUP     WAIT             ;CPU is held in reset
#5 BREAKMODE   HARD
#5 SCANPRED    6   30
#5 SCANSUCC    5   25
;
; Core#6 parameters
#6 CPUTYPE     CNMIPS
#6 ENDIAN      BIG
#6 JTAGDELAY   5
#6 STARTUP     WAIT             ;CPU is held in reset
#6 BREAKMODE   HARD
#6 SCANPRED    5   25
#6 SCANSUCC    6   30
;
; Core#7 parameters
#7 CPUTYPE     CNMIPS
#7 ENDIAN      BIG
#7 JTAGDELAY   5
#7 STARTUP     WAIT             ;CPU is held in reset
#7 BREAKMODE   HARD
#7 SCANPRED    4   20
#7 SCANSUCC    7   35
;
; Core#8 parameters
#8 CPUTYPE     CNMIPS
#8 ENDIAN      BIG
#8 JTAGDELAY   5
#8 STARTUP     WAIT             ;CPU is held in reset
#8 BREAKMODE   HARD
#8 SCANPRED    3   15
#8 SCANSUCC    8   40
;
; Core#9 parameters
#9 CPUTYPE     CNMIPS
#9 ENDIAN      BIG
#9 JTAGDELAY   5
#9 STARTUP     WAIT             ;CPU is held in reset
#9 BREAKMODE   HARD
#9 SCANPRED    2   10
#9 SCANSUCC    9   45
;
; Core#10 parameters
#10 CPUTYPE    CNMIPS
#10 ENDIAN     BIG
#10 JTAGDELAY  5
#10 STARTUP    WAIT             ;CPU is held in reset
#10 BREAKMODE  HARD
#10 SCANPRED   1   5
#10 SCANSUCC   10  50
;
; Core#11 parameters
#11 CPUTYPE    CNMIPS
#11 ENDIAN     BIG
#11 JTAGDELAY  5
#11 STARTUP    WAIT             ;CPU is held in reset
#11 BREAKMODE  HARD
#11 SCANPRED   0   0
#11 SCANSUCC   11  55
;
;======================================================


[HOST]

#0  PROMPT  cnMIPS#0>
#1  PROMPT  cnMIPS#1>
#2  PROMPT  cnMIPS#2>
#3  PROMPT  cnMIPS#3>
#4  PROMPT  cnMIPS#4>
#5  PROMPT  cnMIPS#5>
#6  PROMPT  cnMIPS#6>
#7  PROMPT  cnMIPS#7>
#8  PROMPT  cnMIPS#8>
#9  PROMPT  cnMIPS#9>
#10 PROMPT  cnMIPS#10>
#11 PROMPT  cnMIPS#11>


[REGS]
FILE bdi/cnmips.def ; Relative to tftpboot location
FILE bdi/cn56xx-abatron-csrs.def ; Relative to tftpboot location