; Initial bdiGDB configuration file for AT91SAM9261 board
; ------------------------------------------------
;
[INIT]
; Let from setup the board

[TARGET]
CPUTYPE     ARM926E
CLOCK       1        ;JTAG clock (0=Adaptive, 1=16MHz, 2=8MHz, 3=4MHz)
RESET       HARD 300    ;Assert reset line for 300 ms
BREAKMODE   HARD        ;SOFT or HARD, ARM / Thumb break code
STEPMODE    HWBP
STARTUP     RESET

[HOST]
IP          151.120.25.119
PROMPT      SAM9>       ;new Telnet prompt

[FLASH]
CHIPTYPE    AT91SAM7S   ;Don't forget to set MC_FMR[FMCN] and MC_FMR[FWS]
CHIPSIZE    0x10000     ;The size of one flash chip in bytes
BUSWIDTH    32          ;The width of the flash memory bus in bits (8 | 16 | 32)
;FILE        E:\temp\dump16k.bin
;FORMAT      BIN 0x00104000

FILE        test.bin
FORMAT      BIN 0x00100000


[REGS]
FILE